weber.colordewdrop 

weber.color dewdrop is a cementitious water repellant tile grout used for internal application. It is suitable for grouting ceramic tiles, vitrified tiles, marbles, granites, mosaics & natural stonein walls and floors.

Water repellant joint filler.

• Weber.color dewdrop is recommended for use on tile joints of 1-6 mm width.
• Ensure 24 hours time interval for grouting after tile fixing.
• Keep the grouted area free from dust particles for minimum 24 hours.
• For best results, use spacers and keep a minimum of 2 mm joint between tiles.

• Clean and remove any loose particles.
• Make sure that the tiles joints are clean and saturated and excess water is removed from joints before grouting.
• This will ensure good adhesion of grout as well as uniform color after drying.

• Gradually add approximately 3 parts of powder to 1 part of clean water ( measured by volume ) and mix to a smooth, workable, stiff paste.
• Do not attempt to extend the pot life by adding water to the mix.
• keep the wet mortar idle ofr 2-3 minutes.

Consumption depends on tile size and joint width.   For example, for a tile a tile of 20cm X 20cm with a 2mm joint width, the coverage would be approximately 0.2 kg/sqm

1 year from the date of manufacturing, for unopened bags, stored in dry condition.