weber.setflex 

weber.set flex is a high performance polymer modified adhesive for fixing low porosity* and large format tiles where nominal substrate movement is expected.

• It is a ready to use mix; a single component   product,   just add water in the specified proportion   and apply.
• It has excellent adhesion properties, no slip is observed on vertical applications.
• Shrinkage cracks are minimized/eliminated due to its self curing properties.
• Larger quantity of material can be mixed at a time due to its longer pot life.
• The tiled floor can be made available for the foot traffic after 24 hours.
• It is suitable for heavy duty applications with moderate structural movements.
• It is recommended for external cladding.

• It can be used on substrates like cementitious screeds, self leveling floors which are suitably cured on both internal and external surfaces.
• It is suitable for fibre cement boards, old tiles   (porous   and non porous) on walls using weber.tec prime and renders for both interior and exterior surfaces.
• It can be effectively used on vinyl tiles and on wooden floors using weber.tec prime.

Note- For application on any other substrate please contact Saint Gobain Weber personnel for technical assistance.

SURFACE  PREPARATION 

• Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance if any using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption. For fresh plasters & screeds ensure complete curing as recommended.
• Concrete screeds, renders and block work should be cured sufficiently to avoid the shrinkage cracks.
• Correct the local undulation/damage on the substrate at least 48 hours before the application of weber.set flex.
• Saturate the surface well and remove excess water before application of the tile adhesive.

• Gradually add 3 parts of powder to 1 part of water (by volume) and mix it to a smooth, workable paste using a suitable stirrer or a low speed drill mix.
• Do not attempt to extend the pot life by adding more water to the mix.
• After mixing allow the mixture to stand for 2  minutes for it to mature. 

Single spreading – 3.5 kg/sqm
Double spreading – 6 kg/sqm

Note- The coverage will vary depending on surface conditions.

1 year from the date of manufacturing,  for unopened bags, stored in dry condition.