Weber Saint-Gobain - Official website of the company

weber groutadd

weber groutadd
weber groutadd

Product benefits

  • Enhances the strength of grout
  • Imaparts flexibility
  • Used to fill wider tile joints
  • Less shrinkage, watertight joints
  • Easy and faster application

 

 

weber groutadd is a blend of polymeric emulsion to be added in weber cementitious grout to enhance the strength and durabilityof the grout when applied between tile and stone in internal and external areas under wet and dry conditions on wall an floors.

Product Description and Features

Product Description

weber groutadd is a blend of polymeric emulsion to be added in weber cementitious grout to enhance the strength and durabilityof the grout when applied between tile and stone in internal and external areas under wet and dry conditions on wall an floors. Addition of weber grout admix helps to impart more flexibility and adhesion strength to withstand abrasion and to fill wider joints between tile and stone.

Key Features

  • Suitable for all types of tile and stone.
  • Econimic in use
  • Weber groutadd mixed with weber cementitious grout can be used in joints between 1- 8mm
  • Ease in mixing and faster application
  • Impart flexibility
  • Crackfree and less shrinkage result in watertight joints reduces the chances of water seepage through joints
  • Improve adhesion of grouts to tile and stone joints, results in to more durable grout
  • Enhances compressive strength results to absorb traffic movement.

Technical Parameters

Appearance                                                        Milky white

ph                                                                       8 - 10

Specific gravity@ 27C                                           1.01+/-0.01

Pot Life90 mins
Time to walk on grouted floor24 hours after grouting
Site temperature at the time of applicationBetween + 5ºC and 40ºC
Compressive strength @ 28 days> 20 Mpa
Flexural strength @ 28 days>7 Mpa
Water absorbtion after 80 min<10 gm
Shrinkage<3mm/m

 

 

 

Documentation

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Preparation and Application

Direction For Use

  • Ensure 24 hour time interval for grouting after tile fixing
  • Keep the grouted area free from dust particles for min 24 hours
  • Remove the spacer between the tiles, clean and remove any loose paricles
  • Make sure that the tile joints are clean and saturated and excess water is removed and its dried from the joint before grouting

Mixing Ratio

  • Gradually add approximately 2.5 parts of powder to 1 part of weber groutadd (measured by volume) allow the admixture to wet the powder for 2 mins and mix thoroughly to a smooth workable stiff paste.
  • Do not extend the pot life by adding more water to the mixed quantity.

Grouting

  • Completely fill the joints wth weber colorfine/dewdrop grouts diagonlly across the tile surface using a grout float or appropriate tool.
  • Wait for 30 - 60 mins till the grout starts to set
  • Remove excess grout using a sponge after 45 - 60 mins
  • After drying about 90 mins clean the tiles using a clean and dry cloth.

Consumption

Consumption depends on tile size and joint width.   For example, for a tile a tile of 20cm X 20cm with a 2mm joint width, the coverage would be approximately 0.2 kg/sqm

Shelf Life

1 year from the date of manufacturing, for unopened bags, stored in dry condition.

Packaging

1L, 20L Bottle