Weber Saint-Gobain - Official website of the company

weber.color fine

weber.color fine
weber.color fine

Product benefits

  • Enhances Decor
  • Available in a range of colors
  • Crack free tile joints
  • Long lasting joint filler

It is cementitious tile joint filler suitable for filling tile joints of ceramic tile, vitrified tiles, marbles, granite, mosaics and natural stone on walls and floors for both internal and external application.

Product Description and Features

Product Description

weber.color fine is a polymer cementatious joint filler used for internal and external application. It is suitable for grouting ceramic tiles, vitrified tiles, marbles, granites, mosaics & natural stone on walls and floors.

Key Features

  • Cementitious Joint filler.
  • Suitable for grouting all types of tiles and stone.
  • Available in a range of colours to enhance the beauty of every tile.

 

 

Recommendation

  • weber.color fine is recommended for use on tile joints of 1-6 mm width.
  • Ensure 24 hours time interval for grouting after tile fixing.
  • For best results, use spacers and keep a minimum of 2 mm joint between tiles.
  • If tiles are highly porous, do a sample test to check for possible staining. To avoid this problem, mask the tiles before grouting.

Technical Parameters

Technical Parameters
Bulk Density1.10 - 1.20 g/cc
Pot LifeUpto 1 hour
Time to walk on grouted floor24 hours after grouting
Recommended tile joint width1 - 6 mm
Site temperature at the time of applicationBetween + 5ºC and 35ºC
Initial Setting60 - 120 minutes
Final Setting160 - 220 minutes
Compressive strength at 28 days16 Mpa

 

 

 

Documentation

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Preparation and Application

Direction For Use

     SURFACE PREPARATION

  • Clean and remove any loose particles.
  • Make sure that the tiles joints are clean and saturated and excess water is removed from joints before grouting.
  • This will ensure good adhesion of grout as well as uniform color after drying.

Mixing Ratio

  • Gradually add approximately 2.5 parts of powder to 1 part of clean water (measured by volume) and mix it to a smooth, workable, stiff paste.
  • Do not attempt to extend the pot life by adding more water to the mix.
  • Keep the wet mortar idle ofr 2-3 minutes.

 

 

Grouting

  • Completely fill the tile joints with weber.colorfine diagonally across the tile surfaces using a rubber grouting trowel or an appropriate tool.
  • Wait till weber.colorfine has started to set (30 - 45 mins)
  • Remove excess grout using a sponge (45 - 60 mins)
  • After drying about 3 hours clean the tiles using a dry cloth.

Consumption

Consumption depends on tile size and joint width. For example, for a tile a tile of 20cm X 20cm with a 2mm joint width, the coverage would be approximately 0.2 kg/sqm

Shelf Life

1 year from the date of manufacturing, for unopened bags, stored in dry condition.

Reference

weber.color fine

weber.color fine
weber.color fine

Product benefits

  • Enhances Decor
  • Available in a range of colors
  • Crack free tile joints
  • Long lasting joint filler

It is cementitious tile joint filler suitable for filling tile joints of ceramic tile, vitrified tiles, marbles, granite, mosaics and natural stone on walls and floors for both internal and external application.

Packaging

1 kg, 20 kg bags