Weber Saint-Gobain - Official website of the company

weber knight armor

weber knight armor
weber knight armor

New

Product benefits

  • It can be used as green building products since it utilizes the natural energy to provide luminance in dark for pedestrian movement with a high aesthetic appeal.
  • Non-sag formula for wall & floor applications.
  • High bonding strength with tiles and stones.
  • Joints with weber knight armor are resistant to most of the commercial tile & stone cleaners.
  • Non absorbent i.e. water resistant joints prevent growth of fungus and bacteria.
  • Two components, ready to mix, ensures consistent quality of grouts.
  • Very low shrinkage and high resistance to cracks.

Weber knight armor is a 2 component, high performance 100% solid epoxy based tile/stone joint filler which provides photo luminescence during dark.

Product Description and Features

Product Description

Weber knight armor is a 2 component, high performance 100% solid epoxy based tile/stone joint filler which provides photo luminescence during dark. It can absorb natural or house hold light & provide luminescence in darkness when placed between tiles or stones. Apart from a transparent hybrid resin & additive, it has a pigment coated on the reflective, spherical filler which allows light to enter deep inside the material & excite the particles to provide luminance of highly aesthetic & decorative joints in the absence of light. The luminance from joints is consistent based on the intensity & exposure time made available to the joints. Weber knight armor is based on reaction resin formulations resulting in water tight & durable joints & the luminance is protected against household & commercial cleaners used daily for cleaning tiles & stones. The formulation of Weber knight armor is made in such a way that it remains neutral and absorbs light energy during the day and becomes visible during the dark to provide sufficient light enabling it to be used for directions during pedestrian movements without utilizing any additional energy source. It is thixotropic in nature with non-sag formula which can be applied on horizontal & vertical, interior & exterior, dry, wet & submerged conditions in residential & commercial applications. It can used with ceramic tiles, porcelain tiles, vitrified tiles, glass mosaic tiles, 3D glass tiles, back splash glass tiles, natural & artificial stones & all types of marbles & granites.

Key Features

• It can be used as green building products since it utilizes the natural energy to provide luminance in dark for pedestrian movement with a high aesthetic appeal.

• Non-sag formula for wall & floor applications.

• High bonding strength with tiles and stones.

• Joints with weber knight armor are resistant to most of the commercial tile & stone cleaners.

• Non absorbent i.e. water resistant joints prevent growth of fungus and bacteria.

• Two components, ready to mix, ensures consistent quality of grouts.

• Very low shrinkage and high resistance to cracks.

• Easy to mix, creamy consistency, faster in application and ease in cleaning to get smooth & decorative finish.

• Excellent chemical & stain resistance properties.

• High mechanical strength allows usage in high foot traffic areas, open parking & vehicle movement.

• It can be applied in between the tile & stone under submerged condition due to its water resistance properties.

• It can also be used as adhesive for fixing transparent glass tiles & blocks.

• Minimum exposure of light intensity at joints required from 300-1000 lux to get visible luminance for more than 5–8 hours and luminance been tested as per international standard.

• High translucence with coated pigment increases the chromatic effect resulting into highly aesthetic and decorative finish.

Area of Application

• For joint filling in between tiles and stone where high aesthetic & decorative finish is desired.

• Grouting with weber knight armor in areas of

• Residential

• Commercial

• Office lobbies

• Hospitals

• Airports

• Pathways fire exits

• Swimming pools

• Disco theque

• For places which require grouting & illumination in dark.

• For wood works as a grouting.

Technical Parameters

Technical Parameters
Component APremixed resin with filler
Component BLight yellow
Mixing ratio

Part A: Part B - 11.5:1 by weight

Part A: Part B - 7:1 by volume

ConsistencyCreamy paste consistency
Mixed density1.60 gm/cc
Potlife45 minutes @ 27°C
Application temperature range10°C to 35°C
Open time for adhesive20 minutes
Adjustability time for adhesive30 minutes
Setting for light foot traffic24 hours
Full Cure7 days
ColorGreen & Blue

 

 

 

Documentation

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Preparation and Application

Direction For Use

Surface Preparation

• The tiles/stones should be firmly set & the adhesive or mortar is completely dry.

• In wet stage adhesive/mortar to be removed from the joints to avoid contamination during grouting.

• Grout joints must be clean and free of standing water, solvent, dirt, dust & foreign matter.

• The spacers should be removed before grouting.

• The tiles/stones should not be cleaned with acid cleaners and all joints should be cleaned by washing with water/detergent.

Mixing

• Use personal protective equipment before mixing.

• Add hardener component B into the component A container and mix the content for 3-5 minutes with slow speed mixer ensuring proper mixing of the component. Do not prolong the mixing time to avoid air entrapment resulting in reduction of pot life.

• In case of small quantity use approx 7 : 1 ratio by volume of component A (resin) to component B (hardener) and mix thoroughly for 5 minutes with trowel or appropriate tool.

• Mixed workable grout to be used within 45 minutes at 27oc.

• Tools need to be cleaned immediately with water after the application, hardened material will be difficult to remove.

• No water to be added to the mix.

Product Application

• Spread the grout on surface with rubber grout float or appropriate tool. It need to be filled diagonally across the joints, ensuring packing is full to avoid any free air voids.

• Excess grout to be removed from the tile surface by pulling the rubber float or appropriate tool diagonally across the joint by preventing any grout removal.

Cleaning & Finishing

• Cleaning to be done 15-20 mins after grouting. Incase of any individual doing the application only grout as much area as can be cleaned in next 15 to 20 mins. In case of team doing application one person should do grouting and other person follow by cleaning.

• Always use fresh and clean water for cleaning and finishing.

• Rinse the scrubber with water and squeeze to completely dry, move the scrubber flat, lightly on the tile surface in circular motion for cleaning and to prevent grout removal from the joints.

• Do not use excessive water while cleaning as it will delay the curing time as well can create haziness on the joints, excess water if any to be removed immediately.

• Water to be changed at regular interval or when found water gets dirty.

• Check for any incompletely filled joints during cleaning and if found fill it up immediately.

• Allow cleaned area to dry and use dry clean cloth for final cleaning of the grouts.

• No traces of epoxy to be left on the tile, once hardened it’s difficult to remove the material from the surface.

• On smooth surface like glass mosaic and glass tile weber knight armor can be cleaned with well squeezed clean cloth.

• Grouted area of swimming pool, wet, shower, fountain and steam shower area need to be protected for minimum 7 days from moisture.

Mixing Ratio

• Use personal protective equipment before mixing.

• Add hardener component B into the component A container and mix the content for 3-5 minutes with slow speed mixer ensuring proper mixing of the component. Do not prolong the mixing time to avoid air entrapment resulting in reduction of pot life.

• In case of small quantity use approx 7 : 1 ratio by volume of component A (resin) to component B (hardener) and mix thoroughly for 5 minutes with trowel or appropriate tool.

• Mixed workable grout to be used within 45 minutes at 27oc.

• Tools need to be cleaned immediately with water after the application, hardened material will be difficult to remove.

• No water to be added to the mix.

Consumption

CONSUMPTION (Grout) :

  • Consumption depends on tile size and joint width.   
  • For example, for a tile a tile of 20cm X 20cm with a 2mm joint width, the coverage would be approximately 0.2 kg/sqm

CONSUMPTION (Adhesive) :

  • The consumption is approximately 5-6 kg/sqm for 3mm bed thickness

Note : The consumption will vary depending on surface undulations.

Shelf Life

2 years from the date of manufacturing under sealed condition. To be stored in shed and away from direct sunlight.

Packaging

Available in 1kg and 5kg packs.

Colour

Green & Blue