Weber Saint-Gobain - Official website of the company

weber.set plus grey

weber.set plus grey
weber.set plus grey

Product benefits

  • Ready to mix, single component product
  • Superior bond strength
  • Long lasting adhesion
  • Self curing
  • For fixing ceramic tiles, vitrified tiles & porous natural stone
  • For internal and external application
  • For RCC surface

It is a grey cementitious tile adhesive for fixing normal, medium and low porosity tiles on internal and external walls and floors

Product Description and Features

Product Description

weber.set plus grey is a polymer modified cementitious tile adhesive used for fixing ceramic tiles, vitrified tiles and stone of regular size on wall and floor with regular traffic. It is applicable for both interior and exterior conditions.

Key Features

  • It is a ready to mix; a single component product, just add water in the specified proportion and apply.
  • It has excellent adhesion properties, no slip is observed on vertical applications.
  • Shrinkage cracks are minimized/eliminated due to its self curing properties.
  • Larger quantity of material can be mixed at a time due to its longer pot life.
  • The tiled floor can be made available for foot  traffic after 24 hours.
  • It provides good water as well as heat resistance for external applications.

Recommendation

It is recommended for application on cementitious substrates, self leveling screeds and fibre cement boards.

Note - For application on any other substrate please contact Saint-Gobain Weber personnel for technical assistance.

Technical Parameters

Technical Parameters
Bulk Density1.45- 1.55 g/cc
Pot Life2 hours 30 minutes
Initial Setting160 - 220 minutes
Final Setting300 - 360 minutes
Open Time20 - 30 minutes
Adjustment Time15 minutes
Slip Resistance at 20 kg/sqm0mm
Foot traffic/ groutable24 hours
Tensile adhesion strength at 28 days

Inital > 0.5 Mpa

After immersion > 0.5 Mpa

Compressive strength at 28 days> 9 Mpa

Documentation

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Preparation and Application

Direction for use

  • Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
  • Ensure that the substrate is flat, stable, well adhered and has a normal absorption. 
  • Concrete screeds, renders and block work should be   cured sufficiently to avoid the shrinkage cracks.
  • Correct the local undulation/damage on the substrate at least 48 hours before the application of weber.set plus-grey.
  • Saturate the surface well and remove excess water before application of the tile adhesive

Mixing Ratio

  • Gradually add 2.5 parts of powder to 1 part of water (by volume) and mix it to a smooth, workable paste using a suitable stirrer or a low speed drill mix.
  • Do not attempt to extend the pot life by adding more water to the mix.
  • After mixing allow the mixture to stand for 2 minutes for it to mature.

Tile Fixing

  • Apply weber.set plus-grey over the surface using the straight edge of the notched trowel and then comb the applied adhesive using the notched side of the trowel to achieve the desired thickness. If the adhesive is buttered to the tile, then ensure proper coverage of the tile surface to evade voids.
  • Firmly press the tile into the adhesive to ensure good initial bonding.

Consumption

For a 3mm bed thickness the coverage will be 4 - 4.5 kg/sqm
Note:The coverage will vary depending on surface undulations

Packaging

weber.set plus grey - 20 kgs

weber.set nova grey - 30 kgs

Shelf Life

1 year from the date of manufacturing,  for unopened bags, stored in dry condition.

Colour

Grey