Weber Saint-Gobain - Official website of the company

weber.set premier

weber.set premier
weber.set premier

Product benefits

  • Ready to mix
  • Good Coverage
  • Superior bond strength
  • Long lasting adhesion
  • Self curing
  • For fixing ceramic tiles

 

 

It is a cementitious tile fixing adhesive for fixing ceramic tiles of regular size on walls and floors

Product Description and Features

Product Description

Dweber.set premier is a polymer modified cementitious tile adhesive for fixing ceramic tiles of regular size on wall and floor and porous natural stone on the floor. It can be used over cementitious & self leveling screeds for internal application only.

Key Features

  • It is a ready to use mix; a single component product
  • It has excellent adhesion properties, no slip is observed on vertical applications.
  • Shrinkage cracks are minimized/eliminated due to its self curing properties.
  • Larger quantity of material can be mixed at a time due to its longer pot life.
  • The tiled floor can be made available for foot traffic after 24 hours.

Recommendation

It is recommended for application on cementitious substrates, self leveling screeds and fibre cement boards.

Note - For application on any other substrate please contact Saint-Gobain Weber personnel for technical assistance.

Technical Parameters

 

Technical Parameters
Bulk Density1.50 -1.60 g/cc
Pot Life2 hours
Initial Setting200 - 300 minutes
Final Setting300 - 400 minutes
Open Time5 minutes
Adjustment Time5 minutes
Slip Resistance at 20 kg/sqm0 mm
Foot Traffic24 hours
Tensile Adhesion Strength at 28 days

Initial > 0.5 Mpa

After immersion > 0.5 Mpa

Compressive Strength at 28 days> 5 Mpa

 

 

 

Documentation

Printable datasheet

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Preparation and Application

Direction For Use

Surface  Preparation

  • Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
  • Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
  • Concrete screeds, plastered surfaces, block work and renders should be sufficiently cured to avoid shrinkage cracks.
  • Correct the local undulations/damages on the substrate at least 48 hours before the application of weber.set premier.
  • Saturate the surface well and remove excess water before application of the tile adhesive.

Mixing Ratio

  • Gradually add 3  parts of powder to 1 part of water (by volume) and mix it to a smooth, workable paste.
  • Do not attempt to extend the pot life by adding more water to the mix.
  • After mixing allow the paste to stand for 2 minutes for it to mature.

Tile Fixing

  • Apply weber.set premier over the surface using the straight edge of the notched trowel and then comb the applied adhesive on the notched side of the trowel to achieve the desired thickness. If the adhesive is buttered to the tile, then ensure proper coverage of tile surface to avoid voids.
  • Firmly press the tile into the adhesive to ensure good initial bonding.

Consumption

For 3mm bed thickness the coverage will be 4-4.5 kg/sqm
Note:The coverage will vary depending on surface undulations

Packaging

weber.set premier - 20 kg (retail pack)

weber.set premier 30 - 30 kg (retail pack)

weber.set basic - 30 kg (project pack)

Shelf Life

1 year from the date of manufacturing, for unopened bags, stored in a dry condition.

Colour

Grey