Weber Saint-Gobain - Official website of the company

weber.set plus white

weber.set plus white
weber.set plus white

Product benefits

  • Ready to mix, single component product
  • Superior bond strength
  • Long lasting adhesion
  • Self curing
  • Application in wet & dry areas, internal & external application
  • For fixing glass mosaic tiles and stone.

It is a cementitious white tile adhesive for fixing ceramic tiles, vitrified tiles, glass mosaic and natural stones on walls and floors. 

Product Description and Features

Product Description

weber.set plus-white is a polymer modified cementitious white tile adhesive used for fixing ceramic tiles, vitrified tiles, glass mosaic and stones of regular size on  walls and floors with regular traffic. It is specially recommended for glass  mosaic and stones due to its white colour which adds to the aesthetic look.

Key Features

  • It is a ready to mix; a single component product.
  • It has excellent adhesion properties, no slip is observed on vertical applications.
  • Shrinkage cracks are minimized/eliminated due to its self curing properties.
  • Larger quantity of material can be mixed at a time due to its longer pot life.
  • The tiled floor can be made available for foot traffic after 24 hours.

Recommendation

It is recommended for application on cementitious substrates, self leveling screeds, fibre cement boards and blocks. It is suitable under wet and dry conditions including swimming pools and fountains.

Note - For application on any other substrate please contact Saint-Gobain Weber personnel for technical assistance.

Technical Parameters

Technical Parameters
Bulk Density1.45 - 1.55 g/cc
Pot Life2 hours
Initial Setting150 - 210 minutes
Final Setting280 - 340 minutes
Open Time20 - 30 minutes
Adjustment Time15 minutes
Slip resistance at 20 kg/sqm0mm
Foot traffic/groutable24 hours
Tensile adhesion strength at 28 days

Initial > 0.5 Mpa

After immersion > 0.5 Mpa

Compressive strength at 28 days> 9 Mpa

Documentation

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Preparation and Application

Direction For Use

  • Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
  • Ensure that the substrate is flat, stable, well adhered and has a normal absorption. 
  • Concrete screeds, renders and block work should be cured sufficiently to avoid the shrinkage cracks.
  • Correct the local undulation/damage on the substrate at least 48 hours before the application of weber.set plus-white.
  • Saturate the surface well and remove excess water before application of the tile adhesive

Mixing Ratio

  • Gradually add 2.5 parts of powder to 1 part of water (by volume) and mix it to a smooth, workable paste using a suitable stirrer or a low speed drill mix.
  • Do not attempt to extend the pot life by adding more water to the mix.
  • After mixing allow the mixture to stand for 2 minutes for it to mature.

Tile Fixing

  • Apply weber.set plus-white over the surface using the straight edge of the notched trowel and then comb the applied adhesive using the notched side of the trowel to achieve the desired thickness. If the adhesive is buttered to the tile, then ensure proper coverage of the tile surface to evade voids.
  • Firmly press the tile into the adheisive to ensure good adhesion.

Consumption

For a 3mm bed thickness the coverage will be 4 - 4.5 kg/sqm
Note:The coverage will vary depending on surface undulations

Packaging

weber.set plus-white - 20 kgs

weber.set nova-white - 30 kgs

Colour

White