Weber Saint-Gobain - Official website of the company

weber watergaurd

weber watergaurd
weber watergaurd

Product benefits

  • Cementitious waterproofing properties
  • Protects gypsum board, cementitious board & concrete
  • Flexible to bridge hairline cracks
  • High durability
  • Internal and external application
  • Easy application

It is two component high performance acrylic polymer modified cementatious membrane coating for under tile waterproofing

Product Description and Features

Product Description

weber watergaurd is a two component high performance acrylic polymer modified cementatious membrane coating for under tile waterproofing. weber watergaurd protects gypsum board, cementatious board and concrete against water penetration. It provides high resistance to the effect of long term weathering and durable il almost every climatic conditions.

Key Features

  • It is elastromeric two component system, cementatious membrane coating, flexible enough to bridge hairline cracks.
  • It protects gypsum board, cementatious board and concrete against water penetration under long term weathering.
  • Highly durable and economical
  • Easily brush applied
  • Non Toxic in nature
  • It can be used for both internal and external application.

Recommendation

  • weber watergaurd is to be applied on smooth surface like cast concrete, glazed surafce, fiber cement board, plater board, moisture resistant grade plaster board prior to tiling
  • weber watergaurd is a two component system and to be applied after priming the surface with weber primer 401
  • After weber watergaurd is applied allow it tro dry for 72 hours before tiling the surface.

Technical Parameters

Pot Life30 mins
Mixing Rato1 part powder, 1 part ;iquid
ColorLight Grey
Application Temperature25 - 35ÂșC
Adhesion to concreteBetter than concretes internal bond
RecoatableYes

Documentation

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Preparation and Application

Direction For Use

SURFACE  PREPARATION

  • Sturate and clean the surface to remove dust, dirt, laitance, loosely attached particles and bond inhibiting componds
  • Add weeber watergaurd component A and weber watergaurd component B in 1:1 ratio
  • Slowly add filler to the liquid and mix, using slow speed drill fitted with a suitable paddle
  • After mixing allow the mixture to stand for 5 mins for it to mature. later remix the mixture to restore the consistency
  • Brush the mixture firmly onto the primed surface. Care must be taken not to spread the material too thin on the surface.
  • Allow atleast 2-4 hours to cure before applying subsiquent coats

Shelf Life

6 months from the date of manufacturing, for unopened cans, stored in dry condition.

Packaging

20L  component A and 20L component B

Dosage

2kg/sqm for 2 coats. consumption may vary depending on surface conditions.

Colour

Milky White